Sale!

QSC NM-T1 – Tabletop Microphone with Beamforming and PoE for Q-SYS

QSC NM-T1 – Tabletop Microphone with Beamforming and PoE for Q-SYS - Image 2

QSC NM-T1 – Tabletop Microphone with Beamforming and PoE for Q-SYS

•Native Q-SYS beamforming tabletop microphone
•Four software-configurable zones provide up to 360° coverage
•Power over Ethernet (PoE)
•Touchless mute via proximity motion sensor
•Onboard call controls, including a programmable user button customizable in Q-SYS Designer Software
•Programmable RGB light ring for fully customizable color, pattern, speed

The QSC NM-T1 is an advanced network tabletop microphone designed specifically for Q-SYS audio, video, and control ecosystems. Ideal for modern meeting spaces, it features beamforming technology to intelligently capture voice from around the table while minimizing background noise.

Equipped with PoE (Power over Ethernet) and a single network cable connection, the NM-T1 simplifies installation and reduces clutter. Its touch-sensitive mute button with LED status indicators allows participants to intuitively manage their audio presence.

The microphone integrates natively with the Q-SYS platform, enabling centralized configuration, monitoring, and control through Q-SYS Designer software. This makes it a powerful choice for conference rooms, boardrooms, huddle spaces, and collaborative environments where clear voice pickup is essential.

With a sleek, low-profile design and robust construction, the NM-T1 blends into professional environments while delivering high-quality audio performance and intelligent control.

Specifications

Category	Details
Audio
Polar Pattern	Superdirective
Pickup Range	3–9 ft (1–3 m)
Microphone Elements	16 × MEMS microphone elements
Network Input Channels Required	1 × network audio stream and 16 × network audio channels
Frequency Response	100 Hz – 16 kHz, ±3 dB
Sampling Rate	16 kHz (wideband) / 48 kHz (fullband)
Bit Depth	24-bit
Sensitivity	-36 dBFS (94 dB SPL)
Maximum SPL (1 kHz @ 1% THD)	118 dB SPL
Dynamic Range	95 dB
Signal-to-Noise Ratio	65 dB (48 kHz) 66 dB (16 kHz)
Self Noise	28 dB SPL (48 kHz) 28 dB SPL (16 kHz)
Latency	4 ms
Power
Power Requirements	Power over Ethernet (PoE), Type 1 Class 2
Power Consumption	< 6.5 W
Connector Type	RJ45
General Specifications
Dimensions (Ø × H)	4.21 × 1.1 in (107 × 28 mm)
Weight	1.5 lbs (0.68 kg)
Included Accessories	Mounting stem, strain relief cap, CAT6 cable (10 ft / 3 m)

Features

Native Q-SYS beamforming tabletop microphone
Four software-configurable zones provide up to 360° coverage
Power over Ethernet (PoE)
Touchless mute via proximity motion sensor
Onboard call controls, including a programmable user button customizable in Q-SYS Designer Software
Programmable RGB light ring for fully customizable color, pattern, speed
Comprehensive management via Q-SYS Designer Software and Q-SYS Reflect
Includes table-mounting accessories

Advanced Beamforming Technology: The Q-SYS NM-T1 features four software-configurable zones that can be activated based on where coverage is (or isn’t needed) to reduce echo and ensure clarity for far end callers. This also enables flexible seating arrangements and provides up to 360° coverage.

Intuitive UI with touchless muting: Easily manage your meetings with the Q-SYS NM-T1 onboard call controls, including a programmable user button and programmable RGB light ring status indicator, both of which are fully customizable within Q-SYS Designer Software. The microphone also features a built-in proximity motion sensor that allows for a simple hand wave to mute/unmute for users that are nearby.

Gif of touchless muting and unmuting of the NM-T1 mic by hovering a hand above

In Sync with Q-SYS Call Sync: Automatically sync onboard controls and LED status indicators on select Q-SYS device (NM-T1 microphone, TSC Series Gen 3 touchscreens & NL-SB42 PoE speakerbar) keeping the state of all in-room endpoints in sync. Additionally, it provides mute sync for UC platforms via the Q-SYS HID controller, as well as ringing and hook state for Q-SYS softphone and POTS controller.

Gif showing a conference room screen highlighting red with the text 'muted', when the NM-T1 is muted on the conference table

Managing AEC with NM Series: Q-SYS Cores feature dedicated AEC resources for NM Series microphones while also reserving AEC resources for third-party microphones (or additional NM Series microphones). Each Core has a recommended "Maximum NM-T1 Capacity" along with a total "AEC Channel" specification.